 

  







Go back to the TechPlanet home page... 






Lotem 800

TechPlanet CD V.6 N.1, disk 1 of 10: Output Products, Thermal Consumables


 Home | Contact Us | Submit Troubleshooting Info | Search | Help 

Open a print-friendly preview of this page... 


 Menu 

 
 
Lotem 800 automatic BIOS diskette for Windows 95

If required, there are two BIOS diskettes for the Lotem 800.
 The only difference between the two versions, is the value of IRQ10, which can be either set as CI/PnP or as ISA/EISA, depending on the BIOS used:
Lotem BIOS V 1.1 diskette for Windows 95 - (.exe) 
 Valid for Lotem 400/800/ThermoFlex Image CD Ver 1 (510V1N185 or 510V1N765 or 510V51689)
Lotem BIOS V 1.2 diskette for Windows 95 (501V1R085) - (.exe)
 Valid for Lotem 400/800/ThermoFlex/Quantum Image CD Ver 2 (510V51689A).



To amend the BIOS:
1.Switch on the Lotem and press on the DELETE key until getting to the SETUP screen. 
2. Under the SETUP window use the arrow to select the UTILITIES and press <Enter>. 
3. Use the arrows to move to Secure CMOS and change to Disable (by using the <Enter> and arrows) 
4. Press ESCAPE twice and select "Save changes and Exit". 
5. Insert the Diskette to Drive a: and restart the PC. 
6. The Bios will load automatically to the CPU. When finished remove the diskette from Drive a: and restart the PC (by using ALT+CTR+DEL). 
7. During the start up you will need to go to the Setup again (by choosing "F1"). Select the UTILITIES and Secure CMOS (like the first time) and change the setting to ACTIVATED. 
8. Press ESCAPE twice and select Save changes and Exit.
 The Windows 95 will restart. 
9. Set the correct Date and Time.


 

Last updated 
  
21 Oct 2003

 



 Copyright  2005 Kodak. All rights reserved. Confidential. Back to top.


 Home | Contact Us | Submit Troubleshooting Info | Search | Help 
 












  

 Output 

 Software 
 Solutions 

 Proofing 

 Color & Screening

 Scanning 

 Digital 
 Photography 

 Consumables 








































 

  







Go back to the TechPlanet home page... 






Lotem 800

TechPlanet CD V.6 N.1, disk 1 of 10: Output Products, Thermal Consumables


 Home | Contact Us | Submit Troubleshooting Info | Search | Help 

Open a print-friendly preview of this page... 


 Menu 

 
 
Lotem 800 automatic BIOS diskette for Windows 95

If required, there are two BIOS diskettes for the Lotem 800.
 The only difference between the two versions, is the value of IRQ10, which can be either set as CI/PnP or as ISA/EISA, depending on the BIOS used:
Lotem BIOS V 1.1 diskette for Windows 95 - (.exe) 
 Valid for Lotem 400/800/ThermoFlex Image CD Ver 1 (510V1N185 or 510V1N765 or 510V51689)
Lotem BIOS V 1.2 diskette for Windows 95 (501V1R085) - (.exe)
 Valid for Lotem 400/800/ThermoFlex/Quantum Image CD Ver 2 (510V51689A).



To amend the BIOS:
1.Switch on the Lotem and press on the DELETE key until getting to the SETUP screen. 
2. Under the SETUP window use the arrow to select the UTILITIES and press <Enter>. 
3. Use the arrows to move to Secure CMOS and change to Disable (by using the <Enter> and arrows) 
4. Press ESCAPE twice and select "Save changes and Exit". 
5. Insert the Diskette to Drive a: and restart the PC. 
6. The Bios will load automatically to the CPU. When finished remove the diskette from Drive a: and restart the PC (by using ALT+CTR+DEL). 
7. During the start up you will need to go to the Setup again (by choosing "F1"). Select the UTILITIES and Secure CMOS (like the first time) and change the setting to ACTIVATED. 
8. Press ESCAPE twice and select Save changes and Exit.
 The Windows 95 will restart. 
9. Set the correct Date and Time.


 

Last updated 
  
21 Oct 2003

 



 Copyright  2005 Kodak. All rights reserved. Confidential. Back to top.


 Home | Contact Us | Submit Troubleshooting Info | Search | Help 
 












  

 Output 

 Software 
 Solutions 

 Proofing 

 Color & Screening

 Scanning 

 Digital 
 Photography 

 Consumables 








































Lotem 800 automatic BIOS diskette for Windows 95

If required, there are two BIOS diskettes for the Lotem 800.
 The only difference between the two versions, is the value of IRQ10, which can be either set as CI/PnP or as ISA/EISA, depending on the BIOS used:
Lotem BIOS V 1.1 diskette for Windows 95 - (.exe) 
 Valid for Lotem 400/800/ThermoFlex Image CD Ver 1 (510V1N185 or 510V1N765 or 510V51689)
Lotem BIOS V 1.2 diskette for Windows 95 (501V1R085) - (.exe)
 Valid for Lotem 400/800/ThermoFlex/Quantum Image CD Ver 2 (510V51689A).



To amend the BIOS:
1.Switch on the Lotem and press on the DELETE key until getting to the SETUP screen. 
2. Under the SETUP window use the arrow to select the UTILITIES and press <Enter>. 
3. Use the arrows to move to Secure CMOS and change to Disable (by using the <Enter> and arrows) 
4. Press ESCAPE twice and select "Save changes and Exit". 
5. Insert the Diskette to Drive a: and restart the PC. 
6. The Bios will load automatically to the CPU. When finished remove the diskette from Drive a: and restart the PC (by using ALT+CTR+DEL). 
7. During the start up you will need to go to the Setup again (by choosing "F1"). Select the UTILITIES and Secure CMOS (like the first time) and change the setting to ACTIVATED. 
8. Press ESCAPE twice and select Save changes and Exit.
 The Windows 95 will restart. 
9. Set the correct Date and Time.










































